PW 800 E
Pallet tilter in the economy version
The simplest pallet changer in the tilting process is suitable for tilt-stable goods such as cardboard or crates and does not require side walls and pallet clamps due to the 92° angle.
In addition, the PW 800 E offers all advantages of the tilting method, such as, e.g. a very ergonomic pallet handling near to the floor level and compatibility with different pallet types and qualities.
- Simplified pallet change using the tilting method
- Ideal for tilting stable goods such as cardboard boxes or secured goods
- Low-maintenance and low-noise electrical drive without the danger of leakages
- Empty pallet exchange possible in different positions
- Suitable for bad pallet qualities and many different sized pallets
- Loading and unloading possible from 3 sides
- performance: 10 – 20 changes/h
- dimensions (L x W x H in mm): 2200 x 1600 x 2600
- machine weight: approx. 1800 kg
- clamping/turning: electrically driven
- feeding & discharging: pallet truck, forklift etc.
- control mode: hold-to-run or automatic
- power supply: 4 kVA – 16A 400 V
- total weight up to 1000 kg
- pallet dimensions: 800-1000x1200 mm
- max. height incl. pallet: 2000 mm
- goods: e.g. cartons or boxes
- overhang allowed
- automatic mode with access control
- other pallet dimensions
- goods height > 2000 mm
- alignment of overhang & under palletized loads
Pallet changing with the PW 800 E
The proven tilting method of the pallet changer PW 800 is available in another version: the pallet changer PW 800 E. Both models use the tilting method and incline the goods backwards. The difference between the two models: while the PW 800 is fitted with side walls and pallet clamp, the PW 800 E is used without these components. It is therefore ideal for tilting stable and secured goods. The PW 800 E is fitted with a pure electrical drive and doesn’t need any pneumatic or hydraulic energy.
The PW 800 E is the ideal pallet changer for locations with limited space. On the one hand due to its space-saving design. On the other hand, the PW 800 E does not need any side walls. This means that it can be loaded and unloaded comfortably from 3 sides. An important advantage especially when there is little space available.
The pallet change with the PW 800 E is simple and ergonomic: At the beginning the goods are held from above, before the pallet changer tilts it backwards. After returning the empty pallet, this can be comfortably exchanged against the target pallet. Pallet handling is always done ergonomically near floor level. The pallet can be removed in individually adjustable positions.
We recommend the pallet changer PW 800 E for 10 to 20 changes per hour.
All pallet changers in the overview
- clamping of the goods from both sides
- simplest and cheapest variant for robust goods
- ideal for palletizing cardboard boxes and crates
- lowering and changing the pallet by manual pallet truck or hub roller conveyor
- performance: up to 50 changes per hour
tilting and inverting method
- inverting of the goods by 90 to 360° or tilting by 92 to 135°
- ideal for palletizing bagged goods and big bags
- overhang of goods no problem
- reliable even with poor pallet quality and different pallet dimensions
- performance: up to 40 changes per hour
- pushing the goods onto a lower target pallet
- particularly gentle handling of the transported goods
- ideal for sensitive goods
- safe palletizing in case of incomplete loading and stacking with gaps
- performance: up to 60 changes per hour
The modern and robust pallet changers from Baust material flow systems can carry out up to 50 changes per hour. The pallet inverters can also be easily integrated in fully-automated material flow systems. You can exchange any pallets with this pallet inverter. Whether Euro-pallets on plastic pallets for the hygiene sector, on space-saving Düsseldorf pallets or on disposable pallets for transport outside Europe – the Baust pallet changer finishes the job for you quickly and reliably. Here, it doesn’t matter how high the pallet is loaded. The goods only have to withstand the pressure from the side arms.
The PW 500 offers the simplest and therefore most economical variant of palletizing and is particularly suitable for pressure-stable and insensitive goods that can withstand a lot.
PW 500 Inline
The most efficient solution to get robust and pressure resistant goods from one pallet to another fully automatically. The PW 500 Inline offers the proven clamping method for conveyor lines.
For a pallet changer with a turning process, the pallet is held on three sides. The entire stack is turned by 180 degrees “on its head”. That way, the pallets – which are now on top – can be easily exchanged. In industries in which the orientation of the goods is not important, the new pallet can also be placed on the goods first, and then the entire stack can be removed directly after being turned by the pallet inverter. In this variant, only the old pallet has to be lifted off afterwards.
In the pallet changer tilting process, we secure two side walls of the goods and tilt it by 100° to the back. The pallet moves down for the change and can be replaced ergonomically. Then it is pressed back onto the goods and tilted back to the initial position with the pallet changer. Both variations of pallet inverters can be loaded and unloaded with a lift truck as well as a forklift. They change up to 40 pallets per hour. They are available as a freestanding stand-alone element as part of a material flow system.
The pallet inverter PW 600 is ideal where robust goods such as e.g. bagged goods or big-bags are involved. Both poor pallet quality and varying sizes of pallet present no problem.
PW 600 Inline
To change or rotate loaded pallets in a fully automated environment, the choice is the PW 600 Inline.
The PW 700 from Baust is particularly suitable for the speedy pallet changing of robust goods such as bags. Also the exchange of damaged pallets presents no problem for the PW 700. Exactly as with the PW 600 this pallet changer applies the inverting method.
PW 800 E
The simplest pallet changer with tilting method is suitable for tilt-stable goods such as cardboard boxes or crates and does not require side walls and pallet clamps due to the 92° angle.
With the PW 800 from Baust, the pallet change is done by a backward tilting movement from 100 to 135°. The pallet changer PW 800 with side walls and pallet clamp is ideal for unsecured loads such as, e.g. drums, sacks or big-bags.
PW 800 Inline
The pallet changer PW 800 Inline offers a tilting method which has maximum automation and changing performance. The integration in further conveyor technology with additional components such as pallet magazines or packaging machines is possible quite easily.
With the slide-over process, the side walls of the pallet changer encompass the goods very carefully in order to prevent toppling or falling over. The source pallet stands somewhat higher than the previously placed destination pallet. Then, the pallet changer pushes the entire stack carefully onto the destination pallet. Afterwards, it can be easily picked up with a forklift or lift truck. The powerful pallet inverters from Baust material flow systems can handle up to 60 changes per hour with this technology. The pallet changer with the slide-over process is suitable both as a freestanding stand-alone element as well as part of a conveyor system. The units can be loaded alternately from the front and back side and are thereby also usable as a hygienic lock in the food or pharmaceuticals industry. At the same time, pallet changers with the slide-over process are very space-saving.
The PW 1000 ensures a precise and smooth operation where exchange of pallets for large and robust goods is frequently necessary. Its particular attributes are the Plug & Play construction and the simple operation.
The pallet changer PW 2000 encloses the goods very securely – two flexible side walls together with the rear wall secure the goods from three sides. Additional sliding plates ensure a particularly gentle exchange of pallets of highly sensitive goods.
The PW 3000 from Baust offers a clever two-way solution. The pallet changer allows loading and unloading from both the front and rear of the machine and is often used in clean room airlocks.
The PW 4000 is the extended version of the PW 2000 with conveyor technology. Due to the one-sided infeed and discharge of the pallets, the pusher is predestined for a niche location.
The PW 5000 from Baust can be loaded from both ends and be utilized as a fully automated sluice in clean room areas requiring hygienic separation. This makes the pallet changer indispensable, particularly in the food and pharmaceutical industries.
The PW 6000 from Baust is ideal when large quantities of pallets on which highly sensitive goods is stored have to be exchanged. A one-sided material flow and optimized processes are the basis for the most powerful pallet changer.